main_banner

Product

  • Automatic Blaine Apparatus

    Automatic Blaine Apparatus

    Product Description SZB-9 type Automatic Blaine Apparatus/automatic specific surface area measuring instrument According to the requirements of the new standard CBT8074-2008, the company and the National Building Materials Research Institute of Cement and New Materials Institute of Equipment and Equipment Quality Supervision, Inspection and Testing Center developed a new SZB-9 type cement specific surface area automatic measuring instrument. The machine is controlled by a single-chip micr...
  • 5L Laboratory Cement Mortar Mixer

    5L Laboratory Cement Mortar Mixer

    Product Description 5L Laboratory Cement Mortar Mixer Special equipment used to determine the strength of cement mortar according to the international standard IS0679: 1989 cement strength test method Meet the requirements of JC / T681-97. It can also replace GB3350.182 for the use of GBI77-85. Technical Parameters: 1. Volume of mixing pot: 5 liters 2. Width of mixing blade: 135mm 3. The gap between the mixing pot and the mixing blade: 3 ± 1mm 4. Motor power: 0.55 / 0.37KW 5. Net weight: ...
  • Electric Cement Mortar Jolting Table Jolting Apparatus

    Electric Cement Mortar Jolting Table Jolting Apparatus

    Product Description Electric Cement Mortar Jolting Table Jolting Apparatus Special equipment for testing cement mortar according to ISO679: 1999 cement strength test method. It meets the requirements of JC / T682-97 during manufacturing, and is vibrated and formed under the prescribed technology. Technical Parameters; 1.Total weight of vibration part: 20 ± 0.5kg 2. Drop of vibration part: 15mm ± 0.3mm 3. Frequency of vibration: 60 times / min 4. Working cycle: 60 seconds 5. Motor power: 1...
  • Vibrating Table Used for Cement Jolting Table Best quality

    Vibrating Table Used for Cement Jolting Table Best quality

    Product Description Cement Mortar Compaction Jolting Apparatus Special equipment for testing cement mortar according to ISO679: 1999 cement strength test method. It meets the requirements of JC / T682-97 during manufacturing, and is vibrated and formed under the prescribed technology. Technical Parameters; 1.Total weight of vibration part: 20 ± 0.5kg 2. Drop of vibration part: 15mm ± 0.3mm 3. Frequency of vibration: 60 times / min 4. Working cycle: 60 seconds 5. Motor power: 110W 1. Ins...
  • Stainless Steel Cement Le Chatelier Boiling Box/Cement Water Bath

    Stainless Steel Cement Le Chatelier Boiling Box/Cement Water Bath

    Product Description Stainless Steel Cement Le Chatelier Boiling Box/Cement Water Bath The box qualitatively carries out two measurements of the cement method and the cake method, and automatically controls the temperature rise and heat preservation. Meet GB1346-89 inspection regulations. Technical Parameters: 1. Made of all stainless steel, the inner volume is about 31 liters 2. Heating power: 2 groups of 4KW 3. CNC timing: 24h adjustable 4.Net weight: 20kg
  • Hot Ca-5 Cement Free Calcium Oxide Tester

    Hot Ca-5 Cement Free Calcium Oxide Tester

    Product Description Ca-5 cement free calcium oxide rapid measuring instrument Free calcium oxide is the main indicator of cement quality and clinker calcination thermal engineering system. The instrument uses ethylene glycol extraction benzoic acid direct titration method, under specific conditions, only 3 minutes to quickly and accurately determine the free calcium oxide content. It can be used in production control of cement plants, building materials, scientific research units, teachin...
  • Le Chatelier Water Bath

    Le Chatelier Water Bath

    Product Description FZ-31 Le Chatelier Water Bath Equipment specifically developed for the execution of the heating and maintaining boiling for Le Chatelier test for determining the stability of the volume of cement (soundness) The box qualitatively carries out two measurements of the cement Le chatelier method and the cake method, and automatically controls the temperature rise and heat preservation. Meet GB1346-89 inspection regulations.Technical Parameters:1. Made of all stainless stee...
  • Concrete Magnetic Vibrating Table

    Concrete Magnetic Vibrating Table

    Product Description concrete vibration table It is mainly used for the compaction of compression blocks of various concrete and mortar in the laboratory. Technical Parameters: 1. Power supply voltage: 380V 1100W 2. Table size: 600 x 800mm 3.Amplitude (full width): 0.5mm 4. Vibration frequency: 50Hz 5. Number of molding test pieces: 6 pieces 150³ test molds, 3 pieces 100³ triple test molds 7.Net weight: about 260kg
  • Cement Vicat Needle Apparatus

    Cement Vicat Needle Apparatus

    Product Description ISO Cement Standard Consistency and Setting Time Tester (new standard French Vicat) This vicat instrument is mainly composed of iron seat, support, stainless steel sliding rod, graduated scale, test mold (circular mold), test rod, test needle, etc. The new standard method of Vicat is based on the equivalent of IS09597-1989 “Cement Test Method-Determination of Water Consumption and Setting Time of Standard Consistency of Clean Pulp”, which is suitable for P...
  • Apparatus of Fluidity of Cement Mortar Cement Mortar Flow Table Apparatus

    Apparatus of Fluidity of Cement Mortar Cement Mortar Flow Table Apparatus

    Product Description Apparatus of Fluidity of Cement Mortar Cement Mortar Flow Table Apparatus This instrument meets the requirements of JC / T 958-2005 standard and is mainly used for the fluidity test of cement mortar. Technical Parameters: 1.Total weight of the beating part: 4.35kg ± 0.15kg 2. Falling distance: 10mm ± 0.2mm 3. Vibration frequency: 1 / S 4. Working cycle: 25 times 5. Net weight: 21kg  
  • Cement Vibro Shaker Sifter Sieve Vibrating Screen

    Cement Vibro Shaker Sifter Sieve Vibrating Screen

    Product Description XZ-I Rotary Vibrating Sample Mixing Screen Rotary vibrating dip is a small screening equipment, mainly used in cement plant laboratory, automatic screening of cement clinker samples after grinding. It can also be used in other industrial and scientific research systems to screen granular or powder materials with different “mesh” degrees. Technical Parameters 1. Feeding port: Ф200mm high 640mm 2. Coarse material (unloading port of upper box: Ф80mm high 400m...
  • 40x40mm Bending Fixture For Cement Pressure Testing Machine

    40x40mm Bending Fixture For Cement Pressure Testing Machine

    Product Description ISO New Standard Cement Mortar Prism Flexural Jig 40mmx40mm cement compression fixture JC / T683-2005In order to ensure the quality of compression fixtures, China has developed the cement compression fixture industry standard JC / T683-2005, which has strict regulations on the technical requirements of cement compression fixtures.According to the regulations, our company has studied and improved after two years of efforts Under the cooperative test with the Cement Phys...
Write your message here and send it to us