2000KN Automatically Computer Control Testing Machine
2000KN Concrete compression Strength testing machine
Main specifications and technical parameters
|
Maximum test force: |
2000kN |
Testing machine level: |
1level |
|
Relative error of test force indication: |
±1%within |
Host structure: |
Four column frame type |
|
Piston stroke: |
0-50mm |
Compressed space: |
360mm |
|
Upper pressing plate size: |
240×240mm |
Lower pressing plate size: |
240×240mm |
|
Overall dimensions: |
900×400×1250mm |
Overall power: |
1.0kW(Oil pump motor0.75kW) |
|
Overall weight: |
650kg |
Voltage |
380V/50HZ |
Attention: If there is an error between manual measurement and actual measurement of the external dimensions, please refer to the actual product.
7、 Installation and Adjustment
1. Inspection before installation
Before installation, check whether the components and accessories are complete and undamaged.
2. Installation program
1) Lift the testing machine in a suitable position in the laboratory and ensure that the casing is securely grounded.
2) Refueling: YB-N68 is used in the south, and YB-N46 anti wear hydraulic oil is used in the north, with a capacity of about 10kg. Add it to the required position in the oil tank, and let it stand still for more than 3 hours before the air has sufficient time to exhaust.
3) Connect the power supply, press the oil pump start button, and then open the oil delivery valve to see if the workbench is rising. If it rises, it indicates that the oil pump has supplied oil.
3. Adjusting the level of the testing machine
1) Start the oil pump motor, open the oil delivery valve, raise the lower pressure plate by more than 10mm, close the oil return valve and motor, place the level gauge on the lower pressure plate table, adjust the level to within ± grid in both the vertical and horizontal directions of the machine base, and use an oil resistant rubber plate to pad it when water is uneven. Only after leveling can it be used.
Concrete Cube Compression Testing Machine
Post time: Feb-13-2024
