Customer purchase vacuum drying oven with vacuum pump
一.
1)Installation: vacuum drying oven should be placed in the indoors with good ventilation conditions, no strong vibration, can not be placed around inflammable, explosive and corrosive gases.
2)Debug: Close the door and tighten the door handle.Close the back valve and open the vacuum valve. Connect the airway tube on the side way of the chamber with the vacuum pump by rubber tube.Open the vacuum pump power, start pumping. when the vacuum meter indicates the value meeting the requirements,close the vacuum valve and vacuum pump power. Now the chamber is in the vacuum state. If there is no heating function,the debugging of the vacuum drying oven is end.
二.the main technical data:
| Model | DZF-2 |
| Voltage（V） | 220 |
| Power （Ｗ） | 1300 |
| Range of temperature（℃） | 50-250 |
| Wave degree of temperature（℃） | ±1 |
| Workroom size(mm) | 415x345x370 |
| Vacuum degree（Pa） | 133 |
| Number of shelves | 2 |
Post time: Dec-18-2023
