一、Overview
mineral sample pulverizingis an indispensable smashing sample preparation equipment for the production and research of geological, mining, metallurgy, coal, grain, medicinal materials and other industries.
This machine adopts Y90L-6 motor to drive the eccentric tamper, so that the hitting block, the hitting ring and the material box collide with each other, and the smashing task is completed by round-squeezing and flat grinding.
二、Main parameters
| Model | FM-1 | FM-2 | FM-3 |
| Power voltage | Three-phase 380V 50HZ | ||
| Motive power | 1.5KW 6 grade | ||
| Input size | ≤10mm | ||
| Output size | 80-200 mesh | ||
| Capacity of each bowl | Heavy material<150g light material<100g | ||
| Number of Bowl | 1 | 2 | 3 |
| Dimensions | 500×600×800（mm） | ||
1、 small Sampling Pulverizerhas reliable performance and is the latest generation of models.
2、 sturdy and durable, compact structure, easy to operate, no special maintenance.
3、 the use of fully sealed, no dust pollution, no exhaust dust removal equipment.。
4、 do not mix the sample, the crushing particle size is uniform, no need to sieve, shrink.。
5、 high crushing efficiency, coal, coke, grain and the like 30-60 seconds can be, generally sandstone can reach 80-200 mesh in less than five minutes.
laboratory high hard ore rock pulverizerThe spring has the advantages of high strength, high performance and high elasticity. It can effectively reduce the vibration to the lowest point and then transmit it to the base. . The power part is composed of a motor, an eccentric hammer, a supporting steel body, etc. When the motor is started, the eccentric hammer is rotated, and due to the action of the different center and the eccentric hammer, a high-speed peripheral motion is formed, and this motion is transmitted to the grinding portion. The supporting steel body plays a role of upper and lower joints. Since the supporting steel body is a closed device, it also controls the unsafe accident caused by the violent vibration caused by the eccentricity.
The grinding part is mainly composed of a squat seat, a scorpion body, a pulverizing ring, a pulverizing hammer and the like. After the grinding part receives the power of the power part, the pulverizing ring and the pulverizing hammer hit and grind the material at a high frequency in the stern body under the action of the high-speed peripheral body movement, and the materials collide with each other, and the material is impacted and ground under the action of the material. The required micro-powder.
Quick pressing device: consists of eccentric body, rolling element and pressing handle. After placing the material into the vibrating plate and pressing the handle, press the handle down. Press the material on the plate due to the action of the eccentric body.
The function of the pressing device is to fix the abrasive material to the vibrating plate tightly, so that the vibration force is effectively transmitted to the material magazine, the material is operated, and the material is crushed.
The additional function of the hold-down device is to effectively secure the movable parts, allowing the machine to operate safely at high speeds.
Post time: May-25-2023
