Malaysia customer order concrete instrument Compression Strength Testing Machine

Malaysia customer order concrete instrument  Compression Strength Testing Machine

Working conditions

1. Within the range of 10-30 ℃ at room temperature

2. Install horizontally on a stable foundation

3. In an environment free of vibration, corrosive media, and dust

4. Power supply voltage 380V/220V

1、 Main specifications and technical parameters

Attention: If there is an error between manual measurement and actual measurement of the external dimensions, please refer to the actual product.

2、 Installation and Adjustment

1. Inspection before installation

Before installation, check whether the components and accessories are complete and undamaged.

2. Installation program

1) Lift the testing machine in a suitable position in the laboratory and ensure that the casing is securely grounded.

2) Refueling: YB-N68 is used in the south, and YB-N46 anti wear hydraulic oil is used in the north, with a capacity of about 10kg. Add it to the required position in the oil tank, and let it stand still for more than 3 hours before the air has sufficient time to exhaust.

3) Connect the power supply, press the oil pump start button, and then open the oil delivery valve to see if the workbench is rising. If it rises, it indicates that the oil pump has supplied oil.

3. Adjusting the level of the testing machine

1) Start the oil pump motor, open the oil delivery valve, raise the lower pressure plate by more than 10mm, close the oil return valve and motor, place the level gauge on the lower pressure plate table, adjust the level to within ± grid in both the vertical and horizontal directions of the machine base, and use an oil resistant rubber plate to pad it when water is uneven. Only after leveling can it be used.

2) Test run

Start the oil pump motor to raise the workbench by 5-10 millimeters. Find a test piece that can withstand more than 1.5 times the maximum test force and place it in an appropriate position on the lower pressure plate table. Then adjust the hand wheel to make the upper pressure plate separate

Cangzhou Blue Beauty Instrument Co., Ltd. is a professional engaged in metal, non-metal and composite material mechanical properties test equipment research and development and manufacturing of national high-tech enterprises.

The company realizes the sustainable development of the enterprise through scientific product quality management. In recent years, the company’s products have passed the strict market test, established a good technical cooperation relationship with a number of scientific research institutions and laboratories across the country, provided tens of thousands of testing machines for thousands of users at home and abroad, and established a professional pre-sales and after-sales service system.

Our products are exported to many countries, such as Russia, Malaysia, India, Kazakhstan, Mongolia, South Korea, Europe and other countries, are welcomed by customers, and we have always maintained cooperation.