Technical parameters
1.Work Voltage: 220V/50HZ
2.Internal dimensions: 700 x 550 x 1100 (mm)
3. Capacity: 40 sets of Soft practice test molds / 60 pieces 150 x 150×150 concrete test molds
4. Constant temperature range: 16-40% adjustable
5. Constant humidity range: ≥90%
6. Compressor power: 165W
7. Heater: 600W
8. Atomizer: 15W
9. Fan power: 16W
10.Net weight: 150kg
11.Dimensions: 1200 × 650 x 1550mm
Use and operation
1. According to the instructions of the product, first place the curing chamber away from the heat source. Fill the small sensor water bottle in the chamber with clean water(pure water or distilled water), and put the cotton yarn on the probe into the water bottle.
There is a humidifier in the curing chamber on the left side of the chamber. Please fill the water tank with enough water((pure water or distilled water)),connect humidifier and chamber hole with pipe.
Plug the humidifier’s plug into the socket in the chamber. Open the humidifier switch to biggest.
2. Fill water into the bottom of the chamber with clean water((pure water or distilled water)). The water level must be more than 20mm above the heating ring to prevent dry burning.
3. After checking whether the wiring is reliable and the power supply voltage is normal, turn on the power. Enter the working state, and begin to measure, display and control the temperature and humidity. Don’t need to set any valves, all values(20℃,95%RH) are setted well in factory.
1.Service:
a.If buyers visit our factory and check the machine, we will teach you how to install and use the
machine,
b.Without visiting, we will send you user manual and video to teach you to install and operate.
c.One year guarantee for whole machine.
d.24 hours technical support by email or calling
2.How to visit your company?
a.Fly to Beijing airport:By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can
pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours),
then we can pick up you.
3.Can you be responsible for transport?
Yes,please tell me the destination port or address.we have rich experience in transport.
4.You are trade company or factory?
we have own factory.
5.What can you do if the machine broken?
The buyer send us the photos or videos. We will let our engineer to check and provide professional suggestions. If it needs change parts, we will send the new parts only collect cost fee.
Post time: May-25-2023
