Automatic stainless steel water distiller
Uses:
Suitable for making distilled water in laboratory of medicine and health care, chemical industry, scientific research unit etc.
Characteristics:
1.It adopts 304 high quality stainless steel and manufactured in advanced technology. 2.Automatic control,it has functions of power-off and alarm when water-deficient and after make up water and can automaticly heat again.
3.Sealing performance, and effectively prevent the leakage of steam.
| Model | DZ-5L |
| Specifications(L) | 5 |
| Water quantity(Liters/hour) | 5 |
| Power(kw) | 5 |
| Voltage | Single-phase,
220V/50HZ |
| Packing size(mm) | 380*380*780 |
| GW(kg) | 10 |
Packing: carton
Delivery time: 7 work days after getting the payment.
1. Use
This product uses electric heating method to produce steam with tap water and then condensing to prepare the distilled water. For laboratory use in health care, research institutes, universities.
2. The main technical parameters
| Model | DZ-5 | DZ-10 | DZ-20 |
| specification | 5L | 10L | 20L |
| Heating power | 5KW | 7.5KW | 15KW |
| Voltage | AC220V | AC380V | AC380V |
| capacity | 5L/H | 10L/H | 20L/H |
| connecting line methods | single phase | Three phase and Four wire | Three phase and Four wire |
3. 
1、 feeding water faucet 2、distilled water exit 3、evaporation boiler 4、heating indicator light 5、power switch 6、power cable 7、congealing and cooling machine 8、return water pipe 9、overflow funnel（with water level sensor in it）10、overflow gap 11、drain valve 12、alarm light
4. structural features
This instrument is mainly composed by the condenser, evaporator boiler, heating tube and the control section. The main materials are made of stainless steel sheet and stainless steel seamless pipe,with good looks. Electric heating part of the immersion heating pipe, high thermal efficiency. 1, condenser part: the water vapor becomes into distilled water by hot and cold exchanging through this device.It is also demountable. 2, evaporation boiler part:when the water level in the evaporation boiler exceeds the overflow funnel outlet, the water will automatically overflow from the overflow pipe on the overflow funnel. Evaporation boiler is detachable,easy to wash the pot scale. There is the release valve at the bottom of the evaporation boiler, easy to drain off the water or replace the water storage at any time.
3, the heating tube parts: the immersion heating tube installed in the bottom of the evaporation boiler, heat water and get the steam. 4, the control section:the heating of the electric tube or not is controlled by the electrical control section. Electrical control section is composed of the AC contactor, the water level sensor etc.
5. installation requirement
After open the carton,please read the manual first, and install this water distiller according to the diagram.The equipment needs fixed installation use, while paying attention to the following requirements: 1, Power: the user should Connect power supply according to the product nameplate parameters, should use the GFCI at the power place(must be installed in the user’s circuit), the shell of the water distiller must be grounded. To ensure the safe use,the wiring plug and socket should be allocationed, according to the electric current. (5 liters, 20 liters: 25A; 10 liters: 15A)
2, water: connect the water distiller and the water tap by the hosepipe. The exit of the distilled water should be connected the plastic tubing (tube length should be controlled in 20CM),let the distilled water inflow into the distilled water container.
1.Service:
a.If buyers visit our factory and check the machine, we will teach you how to install and use the
machine,
b.Without visiting, we will send you user manual and video to teach you to install and operate.
c.One year guarantee for whole machine.
d.24 hours technical support by email or calling
2.How to visit your company?
a.Fly to Beijing airport:By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can
pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours),
then we can pick up you.
3.Can you be responsible for transport?
Yes,please tell me the destination port or address.we have rich experience in transport.
4.You are trade company or factory?
we have own factory.
5.What can you do if the machine broken?
The buyer send us the photos or videos. We will let our engineer to check and provide professional suggestions. If it needs change parts, we will send the new parts only collect cost fee.
Post time: May-25-2023
