YH-60B Concrete Test Block Curing Box

YH-60B constant temperature and humidity curing box

Fully automatic control function, digital display meter shows temperature, humidity, ultrasonic humidification, the inner tank is made of imported stainless steel.Technical Parameters:1.Internal dimensions: 960 x 570 x 1000 (mm)2. Capacity: 60 sets of Soft practice test molds, 90 blocks 150 x 150x150 concrete test molds.3. Constant temperature range: 16-40 ℃ adjustable4. Constant humidity range: ≥90%5. Compressor power: 185W6. Heater: 600w7. Fan power: 16Wx28. Atomizer: 15W9.Net weight: 180kg

Use and operation

1. According to the instructions of the product, first place the curing chamber away from the heat source. Fill the small sensor water bottle in the chamber with clean water(pure water or distilled water), and put the cotton yarn on the probe into the water bottle.

There is a humidifier in the curing chamber on the left side of the chamber. Please fill the water tank with enough water((pure water or distilled water)),connect humidifier and chamber hole with pipe.

Plug the humidifier's plug into the socket in the chamber. Open the humidifier switch to biggest.

2. Fill water into the bottom of the chamber with clean water(pure water or distilled water). The water level must be more than 20mm above the heating ring to prevent dry burning.

3. After checking whether the wiring is reliable and the power supply voltage is normal, turn on the power. Enter the working state, and begin to measure, display and control the temperature and humidity. Don’t need to set any valves, all values(20℃,95%RH) are setted well in factory.

cement concrete constant temperature and humidity curing box plays a crucial role in ensuring the quality and durability of concrete structures. Concrete is a widely used construction material, and its strength and durability heavily rely on the curing process. Without proper curing, concrete can be prone to cracking, low strength, and poor resistance to environmental factors. This is where the constant temperature and humidity curing box comes into play.

When concrete is first mixed and poured, it undergoes a hydration process, in which the cement particles react with water to form strong crystalline structures. During this process, it is essential to provide a controlled environment that allows the concrete to cure at a consistent temperature and humidity. This is where the constant temperature and humidity curing box comes in.

The constant temperature and humidity curing box provides an environment that mimics the conditions required for optimal concrete curing. By maintaining a constant temperature and humidity level, the curing box ensures that the concrete cures uniformly and at the desired rate. This helps to prevent cracking, increase strength, and enhance durability of the concrete.

The use of a constant temperature and humidity curing box is especially crucial in regions with extreme climate variations. In hot and dry climates, rapid evaporation of moisture from the concrete can lead to cracking and reduced strength. On the other hand, in cold climates, freezing temperatures can disrupt the curing process and weaken the concrete. The curing box provides a solution to these challenges by creating a controlled environment that is independent of external climate conditions.

In addition to regulating temperature and humidity, the curing box also offers the benefit of accelerated curing. By maintaining optimal curing conditions, the curing box can speed up the curing process, allowing for quicker formwork removal and faster project timelines. This is particularly advantageous in construction projects where time is of the essence.

Furthermore, the use of a constant temperature and humidity curing box can lead to cost savings in the long run. By ensuring that the concrete cures properly, the risk of future repairs and maintenance due to poor concrete quality is greatly reduced. This ultimately leads to greater longevity of the concrete structures and lower long-term maintenance costs.

In conclusion, a cement concrete constant temperature and humidity curing box is an essential tool for ensuring the quality and durability of concrete structures. By providing a controlled environment for optimal curing conditions, the curing box helps to prevent cracking, increase strength, and enhance the overall durability of concrete. Its ability to accelerate curing and reduce long-term maintenance costs makes it a valuable asset in the construction industry. As the demands for high-quality and long-lasting concrete structures continue to grow, the constant temperature and humidity curing box will undoubtedly remain a crucial component in the concrete construction process.